On June 7, 2023, the 2023 Ringier Technology Innovation Award Ceremony was successfully held in Shanghai. A total of 78 products shortlisted, and 35 innovative products and technologies finally stood out. FCS's GW-1600RP Series Multi-Component Two-Platen Injection Molding Machine, recognized by the senior jury panel of industry associations, scientific research institutions and enterprise R&D centers, won the "injection molding technology" innovation award. Here, I would like to thank the industry partners who have been concerned about and supported FCS. FCS team will make further efforts to create better injection molding equipment for industry partners. 

Photo/ FCS's “Two-Platen Multi-Component Injection Molding Machine” won the 2023 Plastic Industry Ringier Technology Innovation Award

Jerry Wang, President of Fu Chun Shin (Ningbo) Machinery Manufacture Co., Ltd., was invited to attend the ceremony and shared the R&D results of "FCS GW-1600RP Series Multi-Component Two-Platen Injection Molding Machine".

Photo/Jerry Wang, President of Fu Chun Shin (Ningbo) Machinery Manufacture Co., Ltd. delivers an acceptance speech

Jerry Wang said, "The new energy automobile industry is a national strategic emerging industry, an important support for the implementation of the "dual carbon strategy" in Taiwan, and an important force for the development and transformation of the world automobile industry. In the next five years, the new energy vehicle market will see strong supply and demand, and it is estimated that from 2023 to 2028, Taiwan will produce 80-100 million vehicles for export and sale in domestic market". 

The through integrated headlight lampshade is an important component of the optical system of high-end new energy vehicles. It is generally molded by 3 to 4 kinds of materials, and its length can be up to 2,000 mm. It has become a symbol of the personality and sense of science and technology of new energy vehicles in recent years. Without the need for an intake barrier, the through integrated headlight design can be applied to both headlights and taillights at the same time, which has become the high-end design concept and mainstream design idea of new energy vehicle headlight design. The product is now in great demand. 

At present, the multi-component injection molding machine used for the production of integrated lampshade is mainly based on two injection units, which are mostly arranged in parallel, right angle and opposite direction. It has some problems, such as limited types of injection materials, too long heat flow of the mold, large production area and low matching degree of mold. Therefore, it is an urgent need to produce flexible molding equipment that has more injection units, a compact layout, high injection precision, and a flexible control system to achieve efficient and flexible production of multi-material products. 

Photo/GW-1600RP effect display photo taken by customer on site

Technological strengths
1. The X-type four-injection units are distributed in rectangular four corners, the injection unit structure is concentrated and compact, and the layout is flexible, which can meet the molding needs of a variety of products. 
2. Each injection unit is equipped with high-precision closed-loop control technology to improve repetition accuracy and optimize product quality.  
3. The four injection units can be adapted to a variety of mold requirements and can be flexibly selected. Two-component, three-component, and four-component products can be efficiently and flexibly produced without moving or changing the injection units.  
4. The machine has large-diameter vertical turntable and rotation space, which can carry up to 25 tons of modules through a special bearing pack design.  
5. The turntable is controlled by servomotor, and runs at high speed. The latch mechanism realizes the double accurate positioning of six positions, ensuring the rotation accuracy of the turntable. Multi-component injection molding of two stations, three stations and four stations can be realized.  
6. Matched with the proportional valve switch mold and ejector, and the neutron simultaneous function, the machine can meet the needs of accurate opening and closing mode control and fast cycle.  
7. The high-strength separate sliding foot structure design improves the bearing capacity and stability of the movable mold plates.  
8. The two-platen clamping unit is equipped with the function of removing tie bars. It makes mold replacement convenient and occupies a small space, which is beneficial to the factory space configuration.  

About FCS Group
FCS Group was established in Tainan City in 1974, and later set up factories in Dongguan, Ningbo (Jiangbei, Hangzhou Bay), and India. The company has ranked first in Taiwan injection molding machine industry for many years, and has been listed in top 15 enterprises in China's plastic injection molding machine industry for many times. Adhering to the concept of creating high value-added products, and following the business strategy of globalization and diversification, FCS Group, in addition to making efforts in the R&D, production and sales of injection molding machines, has also branched into the cable, 3C optoelectronics and material technology industries since 2001, with a view to expanding FCS Group's presence to higher-precision and high-tech fields, and enhancing FCS Group's enterprise value and international competitiveness to achieve sustainable management. 

Fu Chun Shin (Ningbo) Machinery Manufacture Co., Ltd., established in December 2001, mainly specializes in the production and sales of various types of precision injection machines, which are mainly special injection molding machines, such as two-component machines, super large machines, high-speed machines and other types of injection molding equipment. Among them, FCS two-component injection molding machine has a high reputation in the market. With its injection molding machines used in automobile, medical equipment, daily necessities, electronic products, home appliances and other industries, the company has customers in more than 70 countries and regions around the world. 

Read more
A New Product From The FCS Multi-Component Injection Molding Machine Line Has Been Released: The Debuts Of The X-Type Parallel Quartet-Injection Molding Machine!

FCS Has Become BYD Auto's Supplier For The Multi-Component Injection Molding Machines, With An Amount Of Accumulative Order Of Approximately RMB 200 Million