ucloud

Short Notice for Machine Maintenance

Dear Sirs,

Thanks for your support and choose FCS brand. Due to the Lunar Chinese New Year is approaching, this is a kindly reminder to inform you the maintenance process before long-term shutdown of the machine. The maintenance process can to keep machine work smoothly after resume for work.

The injection molding machine’s precautions as follows:
1. Clean the machine:
A. After turn off the power, remove the oil、plastic、dust…etc. Make sure the machine is cleaned.

2. Mechanical:
A. Check all of the hoses are working well without damage. If it is damaged, replace a new one.
B. Lubricate to all the grease points of the machine.
C. Check the lubrication system.
D. Check all the screws/bolts.
E. Check the moving platen skate bases run smooth and keep the track cleaned.
F. Clean and do anti-rust protection of platens, and do sanding if found surface is not smooth.

3. Hydraulical:
A. Check the hydraulic oil annually or replace the new oil.
B. Make sure the oil color is transparent and odorless.
C. Clean the oil filter, replace the filter if deformed.
D. Check the oil leakage, if any assistance is needed please take picture to FCS group to analyze.

4. Electrical:
A. The power cable, ground wire and other electrical wires should be tightened. If those wire surface has defect or break, should be replaced immediately.
B. Check the electrical cabinet and the servo motor cooling fans are working well. The fans and filters need to be cleaned.
C. Clean inside of the electrical cabinet with 2~3 bar dry compressed air.

5. Long term shutdown notice:
A. Purge and clean the barrel set to avoid residual materials.
B. If material got jammed at feeding throat, turn off the power before cleaning.
C. If the mold is not removed, do not lock the clamping unit in high pressure clamping state.(the elbow shall not straight)
D. Empty cooling water inside the cooler/mold.
E. Turn off the machine’s main power.

※For more details, please refer to User’s Manual ”chapter 3 – maintenance instructions”.

Should you have any question or assistance needed for maintenance, please feel free to contact with us, FCS will provide you with the best service!
◎ Zen Hu: +886-934-050-360

All FCS members wish you a Happy Lunar Chinese New Year.

FCS GROUP
2017/1/20
 
+886-6-5950688 
+886-6-5951129 
fcsco@fcs.com.tw

COPYRIGHT © FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD. All Rights Reserved.