ucloud

CHINAPLAS 2022 - Meet FCS in Shanghai for a “More Colorful Exploration”

After four years, we can finally meet FCS again in Shanghai! It will join the 35th International Exhibition on Plastics and Rubber Industries (Chinaplas 2022) for a global gathering again! The pandemic in 2020 postponed the exhibition in Shanghai. In 2021, we gathered in Shenzhen and had a short but wonderful meeting. In this gathering in 2022, FCS will be more excellent, and colorful. The pandemic cannot stop FCS researchers from being forging ahead with their ambitions. In the National Exhibition and Convention Center (Shanghai) from April 25 to 28, 2022, FCS will introduce more excellent and multi-color models that can be applied to houseware, food packaging, and the medical industry. In this exhibition, FCS will expand a brand-new market with its star products, the FB two-component injection molding machines, and bring you all-electric two-component injection molding machines and multi-component injection molding machines with electric-driven injection unit, in order to offer more application options for the multi-component industry. It will also show you the highly acclaimed CT-series all-electric injection molding machines. Furthermore, FCS iMF 4.0 Intelligent ManuFactory System will be mounted on the injection molding machines and use intelligent sensing modules to improve product yield and reduce production waste. It can be used regardless of the brand of the injection molding machine, so that the production manager can promptly grasp the production status, thus seizing the “intelligent” manufacturing opportunities for customers.



Multi-Component injection molding system with Electric-Driven Injection Unit: FB-Re Series 
FCS, as the drafter of China's industry standards for two-component injection molding machines, has been selling its star product of FB-R-series rotary table two-component injection molding machines for 38 years, with the sales revenue exceeding RMB 3.3 billion and the clamping force covering 140 to 1,900 tons. Worldwide, over 6,000 sets of FCS two-component injection molding machines have been widely used in various industries. Among them, there are about 450 sets of large-scale two-component injection molding machines (including opposite injection machines) over 700 tons. After launching all-electric two-component injection molding machines in 2020, FCS introduced the multi-component injection molding system with electric-driven injection unit, the FB-Re series, that combines the advantages of traditional hydraulic machines and all-electric injection molding machines, to answer the call of the market.

Advantages of electric injection unit: 
A linear guide for injection carriage could lower the wear and tear, and make the injection control precise and stable. Servo injection closed-loop system could accurately control the speed of each shot, the injection time stability is >99.9%, and with stable molding product weight.

Advantages of hydraulic clamping unit: 
Better load bearing of templates and molds, and longer durability. A rotary table controlled by a servo motor could shorten the rotary time by more than 50%, with a more stable rotary speed switch and more precise positioning. The advanced and power-saving double-servo hydraulic system meets the first grade of the national power saving standard (≤0.40kw h/kg). 

FB-550Re will show the two-component non-slip tray through one cavity mold and the cycle time is around 47 seconds.
 Photo/ Non-slip tray produced by FB-550Re.

Multi-component injection molding system: FB-R Series
Rotary table two-component injection molding machines (FB-R series) favored by customers all over the world are FCS's star products, and they will surely show up in Shanghai. 
A rotary table controlled by a servo motor could shorten the rotary time by more than 50%. Adopting a high efficiency double servo power system is certified to be the first grade of national power saving standard (≤0.40kw h/kg). With an accurate rotary positioning clamper, it protects the mold. The injection unit can be mounted on varieties of models to meet the needs from small to large products. The FB-280R will cooperate with PMC’s automatic out-of-mold assembly solution to produce the airtight container on site. The cycle time is 30 seconds.
 Photo/ Airtight Container produced by FB-280

All-Electric Multi-Component injection Molding System: CT-R series
CT-R series is newly launched in 2020, suitable for multi-color products of “high precision and low pollution”. Adopting multiple independent barrels for smart injection greatly shortens the cycle time. The rate of servo rotary table is improved by 30%-50%, and the positioning precision is up to 0.005°. Linear guide at injection unit makes backpressure approach 0 when charging, and reduces the melt overflow. European servo driver and controller system make injection accuracy up to 0.01mm. Equipped 21.5” touch screen with the smart control interface, CT-R will show the cryovial tubes through 16 cavities mold and the cycle time is around 12 seconds.
 Photo/ Cryovial tubes produced by CT-280R


In Mold Labelling Molding System with all-electric IMM: CT-e Series
CT-e Series is the 1st choice of the application of precision parts and accessories. The injection speed is up to 300 mm/sec, and the injection accuracy reaches 0.01 mm. Mold adjusting adopts a closed-loop servo valve for a faster and precise operation. Using CT-e to make food packaging or IML product could prevent oil pollution, bonding the label with the plastic products during the injection process can produce high-quality products efficiently, cost-effectively, and also environmentally friendly. FCS will demonstrate CT-450e equipped with Gech Automation to display the IML yogurt cups through 12 cavities mold and the cycle time is around 5 seconds.
 Photo/ IML yogurt cups produced by CT-450e.

CHINAPLAS 2022 
Date: Apr.25~ Apr.28 
Location: National Exhibition and Convention Center (Shanghai)
Booth: 1.1 D62
Contact person: Manager, Hank Wu
E-mail: 
HANKWU@fcs.com.tw


Visit FCS Booth 1.1D62 in National Exhibition and Convention Center (Shanghai) from April 25 to 28, 2022. We will provide you with differentiated technology integration and services in the injection molding industry, more colorful exploration of plastic world, and more excellent solutions for products. 
→ Click to see more exhibition information

Click to watch: CHINAPLAS 2021 Highlights
 
+886-6-5950688 
+886-6-5951129 
fcsco@fcs.com.tw

COPYRIGHT © FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD. All Rights Reserved.