To increase the competitive advantage of customers, FCS proposed the whole new series, LM Series-Two Platen Injection Molding Machine. Its a new milestone after FCS proposed AF series-Hybrid Injection Molding Machine last time.
The biggest difference between two-platen injection molding machine and traditional one is that the traditional ones have to use three platens to complete a clamping unit but two-platen injection machine needs only two platens to form the clamping unit. Without the third plate, two-platen injection machine becomes easier to maintain. And without the third platen, the machine needs smaller spaces than the traditional one. This advantage is very important because the cost of factory and land is keeping on growing.
The LM Series of FCS is designed based on the rich experience of FCS and the customers need. And the original concept was introduced from European famous company. The special design makes it fit the customers needs more. The main features of the machine include:
1.The clamping unit adopts advanced design to make sure the platens parallel while they are moving. The high-pressure clamping control adopts Germany Rexroths control parts. This makes the clamping force very precise and protects the mold and the machine.
2.The mold clamping stroke and the capacity are bigger than traditional machine. It makes the machine suit to produce more kinds of product especially the barrel with deep depth.
3.The machine is shorter than the traditional machine. This makes the machine needs smaller space and the factory can be use more efficiently.
4.The machine can provide stable clamping force steadily while injecting. The molding will be done with higher yield rate.
5.There is no toggle structure need for the LM series. The clamping unit needs less lubrication and the maintain cost and pollution will be lower.
6. The mold opening speed is fast which less the molding cycle time.
7. Mold is protected while low pressure which longer the mold life.
8. Newly designed injection unit will provide precise injection.
The LM series of FCS will be promoted to the auto parts industry and big container producers due to its specific features. There will be different clamping force from 1600 tons to 3500 tons available. |
